Ever since we discovered Fixer Upper and Joanna Gaines, we’ve been positively giddy about “shiplap!” A year ago, I had never heard this term and now I would love to shiplap every wall in my house. Like seriously.
My three year old talks about shiplap as if it’s just an every day vocabulary word and my sweet husband just rolls his eyes as I tell him all of my shiplapping plans for the future. My guess is that there are many others out there that have also had their worlds rocked by the beautiful possibility of shiplap, but need some help with getting started.
Well, we’ve got you covered! We have two ways for you to get the shiplap look in DIY style and on a friendly budget. I’m sharing my method in this post and Christine will share her’s in another. Happy Shiplapping friends!
Our master bedroom is big and I wanted an accent wall to give it some farmhouse character. Michael set off to Home Depot for our supplies and I prepped the room.
Michael bought Sande Birch Plywood from Home Depot. He had them cut the boards into 6 inch planks. (Warning- the boards were less than clean cuts so if you can do it yourself, it’s better)
Once he arrived home, we sanded the boards with fine grit sandpaper. We just did the edges and it didn’t take long.
This is me (Becca) taking the boards upstairs.
We started at the top of the wall and did our best to level the boards. We used a nail gun to make it faster but you can do this job with just a hammer (it might take a bit longer).
Progress on the wall…
Once we finished nailing the wood to the wall, it was time to prime and paint. We used Sherwin Williams primer and Alabaster paint. We opted not to fill the nail holes with wood filler because I wanted the rustic look.
Here is the finished wall. I absolutely love how it brightened our master bedroom!
Let me know if you need help or advice. I will just be at home shiplapping.